Cpu Fan Control
Lubbo's Fan Control is designed to be a speed fan controller for MacBook Pro Unibody (Nvidia) under BootCamp. It allows to control MacBook fans settings their speeds depending on the CPU and GPU temperature and it reports CPU and GPUs temperatures, current and target fans RPM.
|License: Freeware||Size: 133 KB||Download (76): Lubbo's Fan Control Download|
Linux ATI CPU HDD Control Daemon is able to reduce power consumption in a laptop by scaling back CPU, GPU (Radeon only), and HDD. It uses CPUFreq, ACPI, HDDTemp, and internal functions. It also checks for thermal overheating for the sake of laptop health. Now implementing an app scheduling...
|License: Freeware||Size: 50.18 KB||Download (90): Linux ATI CPU HDD Control Daemon Download|
wmadm is a dockable app permits to monitor temperature and fan control parameters on an ibook2. This package depends on the adm103x linux-2.6 module provided at the same url. The green part shows the temperature, the yellow line shows temperature at which fan will be started at min speed. And...
|License: Freeware||Size: 18.43 KB||Download (144): wmadm Download|
Do you think your MacBook (Pro) is running too hot? Then give Fan Control a try.Some MacBook (Pro) are just to hot for daylong use. Fan Control adjusts the minimum fan speed depending on the current CPU temperature. For safety, it leaves the original automatic fan speed control intact.
|License: Freeware||Download (560): Fan Control Download|
karabass is my first karamba theme , just nice one, soory for my unpercfect english but its not so easy for a frog. karabass is just system information(memory swap ram cpu fan eth0 houre amarok now playing..) i draw all part with the gimp. Easy to modify it, i put in the compact file a empty...
|License: Freeware||Size: 215.04 KB||Download (81): karabass Download|
SensorsView is a freeware program that monitors temperature of CPU, motherboard, hard disks, voltages, and fan speeds.
This program informs you about critical values of any parameters of your system (e.g. about overheating the processor or a stop of fans).
|License: Freeware||Size: 660 KB||Download (1579): SensorsView Download|
Wmsensormon is a doc app for WindowMaker that utilizes lm_sensors to monitor CPU temp, sys temp, fan speeds, and CPU voltage. It offers configurable warnings for overheating, and the sensors displayed are adjustable by the user with command line parameters. Installation: make make install...
|License: Freeware||Size: 26.62 KB||Download (96): WMsensormon Download|
Dual Core System Monitor with Amarok is a Superkarmaba theme based on the full system monitor dual core widget. Here are some key features of "Dual Core System Monitor with Amarok": ?*A* full system monitor ?*A* support dual core ?*A* Lan traffic (wifi eth2) ?*A* SO info ?*A* cpu temp ?*A* cpu...
|License: Freeware||Size: 40.96 KB||Download (19): Dual Core System Monitor with Amarok Download|
iFanAutoControl is an application to automatic control the fans of the computer and regulate the temperature of MacBook and MacBookPro Apple Computers based on Intel processors and Windows OS.
|License: Freeware||Size: 1013.76 KB||Download (57): iFanAutoControl Download|
Small tool for displaying the CPU clock, CPU usage, RAM usage! If you own an ASUS mainboard, use the CrazyInfo_ASUS.exe. You get additional infos about the CPU temp. and the CPU fan speed. First you must have installed Asus PCProbe. Then copy the CrazyInfo_ASUS.exe into the PCProbe directory and...
|License: Freeware||Size: 122.88 KB||Download (36): CrazyInfo Download|
LinuxBIOS project is aimed at replacing the normal BIOS with a little bit of hardware initialization and a compressed Linux kernel that can be booted from a cold start. The project was started as part of clustering research work in the Cluster Reseach Lab at the Advanced Computing Laboratory at...
|License: Freeware||Size: 1.5 MB||Download (112): LinuxBIOS Download|
check_lm_sensors is a Nagios plugin to monitor the values of on-board sensors and hard disk temperatures on Linux systems. Usage: -h, --help help -c, --check specifies a sensor along with warn and crit values -c fan1=1000,2000 checks if fan1 is above 1000 or 2000 -c vcore=1,2,12 checks if...
|License: Freeware||Size: 12.29 KB||Download (102): check_lm_sensors Download|
GlassHUDX is a beautiful system monitoring theme for SuperKaramba. GlassHUDX is inspired by the wonderful GlassHUD theme from mytharak. It uses modified versions of the backgrounds and some of the layout ideas. GlassHUDX consists of the following widgets: Glassmem - a memory sensor widget...
|License: Freeware||Size: 102.4 KB||Download (72): GlassHUDX Download|
KuSys-Info is a Ku(buntu) Sys(tem)-Info. KuSys-Info karamba applet is based on transwhite. I adapted it a bit and modified it so that it fits to my system and themes. Detection of OS is not automatically right now, so you probably have to adapt the script. To change to the right network...
|License: Freeware||Size: 35.84 KB||Download (77): KuSys-Info Download|
Magican is a sophisticated, and easy to use, all-in-one solution to fulfilling the following user needs; cleaning, optimizing, protecting and monitoring their Mac.
1. Enhanced detection in App Uninstallation
2. Optimized memory usage of Magican
3. Enable displaying Fan speed...
|License: Freeware||Size: 17.27 MB||Download (356): Magican Download|
G4FanControl is a small utility that can be used to specify a certain minimum temperature limit that much be reached before the fans on a PowerBook G4 laptop start up (note: Apple sets the default temperature limit to 60° on these units). Default temperature limits will be restored by Mac OS X...
Platforms: Powerbook G4
|License: Freeware||Size: 10.24 KB||Download (69): G4FanControl Download|
Fan/Temp Karamba Theme is a simple Karamba theme that shows: - CPU Temp - Fan Speed - Chassis Temp - HDD Temp (max 3 hdds) I hope you like it like me. Feedback is welcome. No liability is assumed for damages to hard and software !!. New Driver and Tools KDE-Look.org Community Portal...
|License: Freeware||Size: 2.05 KB||Download (131): Fan/Temp Karamba Theme Download|
Statistics::SPC is a Perl module with calculations for Stastical Process Control (SPC). Creates thresholds based on the variability of all data, # of samples not meeting spec, and variablity within sample sets, all from training data. Note: this is only accurate for data which is normally...
|License: Freeware||Size: 11.26 KB||Download (114): Statistics::SPC Download|
SliKSound is simple Karamba theme to control amaroK, JuK, and KsCD from the desktop, without killing the CPU. Please dont forget to vote and comment.. SliKSound KDE-Look.org Community Portal for KDE Themes Wallpapers Icons Sounds Screenshots Schemes Skins Skinz Screensavers Splash Screens...
|License: Freeware||Size: 32.77 KB||Download (71): SliKSound Download|
If you use Linux with WindowMaker and have a Dell 8XXX Laptop, installed the i8kutils and like some nice DockApps then try this one. wmi8k monitores the CPU temperature and the fan speed. Whats New in This Release: - By clicking on F R and F L you can now control the fans! (Switch fom off...
|License: Freeware||Size: 41.98 KB||Download (79): wmi8k Download|